Skip to content
IONI ENGINEERING ™EV BOXCASE
  • ΝΕΑ ΣΥΣΤΗΜΑΤΑ & EV
  • ΑΚΑΔΗΜΑΪΚΗ ΚΑΙΝΟΤΟΜΙΑ
  • ΕΠΙΚΟΙΝΩΝΙΑ
  • E-SHOP & ΠΑΡΑΓΓΕΛΙΕΣ
    • ΦΟΡΤΙΣΤΕΣ AC & ΚΑΛΩΔΙΩΣΗ
    • ΦΟΡΤΙΣΤΕΣ DC

Toward safer solid-state lithium metal batteries: a review

Toward safer solid-state lithium metal batteries: a review

Zhenkang Wang, Jie Liu, Mengfan Wang, Xiaowei Shen, Tao Qian and Chenglin Yan

Nanoscale Advances

The solid-state lithium metal battery (SSLMB) is one of the most optimal solutions to pursue next-generation energy storage devices with superior energy density, in which solid-state electrolytes (SSEs) are expected to completely solve the safety problems caused by direct use of a lithium metal anode. Most previous work has mainly focused on improving the electrochemical performance of SSLMBs, but the safety issues have been largely ignored due to the influence of the stereotype that batteries with SSEs are always safe. In the actual research process, however, some potential dangers of SSLMBs have been gradually revealed, so extra attention should be paid to this issue. This minireview summarizes several aspects that could raise safety concerns and provides a brief overview of the corresponding solutions to each aspect. Finally, general conclusions and perspectives on the research of SSLMBs with ultra-high safety are presented.

Circular economy considerations in choices of LCA methodology: How…

Circular economy considerations in choices of LCA methodology: How to handle EV battery repurposing?

Magnus Schulz , Niki Bey, Monia Niero, Michael Hauschild

27th CIRP Life Cycle Engineering Conference (LCE2020)Advancing Life Cycle Engineering : from technological eco-efficiency to technology that supports a world that meets the development goals and the absolute sustainability

Growing Electric Vehicle (EV) markets and increasing focus on Circular Economy (CE) strategies have stimulated research in the modelling of EV battery repurposing as a special case of product re-use in Life Cycle Assessment (LCA). This paper reviews the methods suggested in literature. Based on the results, the study proposes three types of LCA approaches on EV battery repurposing, taking the perspective of an automotive manufacturer in a CE context. Furthermore, the paper suggests a classification of EV battery repurposing cases depending on the chosen reference scenario and derives directions for future research.

Μελέτη και κατασκευή τριφασικού αντιστροφέα τάσης για τον έλεγχο…

Μελέτη και κατασκευή τριφασικού αντιστροφέα τάσης για τον έλεγχο κινητήρα μόνιμου μαγνήτη ηλεκτροκίνητου οχήματος

Αλμπάνης, Ιωάννης

Design, development and experimental evaluation of distributed smart grid management algorithms

Τμήμα Ηλεκτρολ. Μηχαν. και Τεχνολ. Υπολογ. (ΔΕ), Πανεπιστήμιο Πατρών

Η παρούσα διπλωματική εργασία πραγματεύεται τη μελέτη, την προσομοίωση, το σχεδιασμό του κυκλώματος και την ανάπτυξη του αντίστοιχου λογισμικού ενός τριφασικού αντιστροφέα τάσης για τον έλεγχο σύγχρονου κινητήρα μόνιμου μαγνήτη τοποθετημένου σε αγωνιστικό όχημα. Η εργασία αυτή εκπονήθηκε στο Εργαστήριο Ηλεκτρομηχανικής Μετατροπής Ενέργειας του Τμήματος Ηλεκτρολόγων Μηχανικών και Τεχνολογίας Υπολογιστών της Πολυτεχνικής Σχολής του Πανεπιστημίου Πατρών. Σκοπός είναι η κατασκευή μιας αξιόπιστης και συμπαγούς τοπολογίας ικανής να τοποθετηθεί και να λειτουργήσει σε περιβάλλον αυτοκίνησης. Επομένως εκτός από τις απαιτήσεις ισχύος και γρήγορης απόκρισης κατά τα μεταβατικά φαινόμενα, είναι απαραίτητο να ικανοποιούνται επιπλέον απαιτήσεις όγκου και ασφαλείας. Οι απαιτήσεις όγκου ικανοποιούνται με την ενσωμάτωση των κυκλωμάτων ισχύος, τροφοδοσίας και ελέγχου σε μία πλακέτα, ενώ οι απαιτήσεις ασφαλείας ικανοποιούνται μέσω ηλεκτρικής απομόνωσης κυκλώματος υψηλής και χαμηλής τάσης. Αρχικά, γίνεται μια ιστορική αναδρομή στην ηλεκτροκίνηση και μία σύντομη ανάλυση του ηλεκτροκινητήριου συστήματος ενός ηλεκτρικού οχήματος. Έπειτα παρατίθενται θεμελιώδεις έννοιες του μαγνητικού πεδίου και μελετώνται τα χαρακτηριστικά των μόνιμων μαγνητών και η αρχή λειτουργίας της σύγχρονης μηχανής μόνιμου μαγνήτη (ΣΜΜΜ). Στη συνέχεια παρουσιάζονται οι εξισώσεις της ΣΜΜΜ και η τοπολογία του αντιστροφέα. Ακολουθεί μια αναφορά στις βασικότερες μεθόδους παλμοδότησης ενός τριφασικού αντιστροφέα τάσης και αναλύεται η μέθοδος του άμεσου διανυσματικού ελέγχου ροής και ροπής. Επειδή αυτό το είδος ελέγχου περιλαμβάνει κλειστό βρόχο, παρουσιάζονται οι βασικές έννοιες της θεωρίας των ελεγκτών PID, ενώ γίνεται και μία περιγραφή των διατάξεων μέσω των οποίων μπορεί να γίνει η εκτίμηση της γωνιακής θέσης του δρομέα. Το επόμενο βήμα είναι η προσομοίωση σε περιβάλλον Simulink του ηλεκτροκινητήριου συστήματος προκειμένου να παρατηρηθεί η απόκριση του συστήματος σε διάφορα σενάρια λειτουργίας και να γίνει ο συντονισμός των ελεγκτών PI. Ακολουθεί η σχεδίαση της τοπολογίας ισχύος καθώς και του κυκλώματος παλμοδότησης και ελέγχου του ελεγκτή και η επιλογή των κατάλληλων στοιχείων. Τέλος παρουσιάζεται η διάταξη που σχεδιάστηκε, γίνεται μεταφορά του λογισμικού παλμοδότησης και ελέγχου από την προσομοίωση στο μικροελεγκτή και παρουσιάζονται τα πειράματα που διεξήχθησαν. Επιπλέον περιγράφεται ο τρόπος με τον οποίο αντιμετωπίστηκαν διάφορα προβλήματα που προέκυψαν λόγω κατασκευαστικών ατελειών του κινητήρα. Κλείνοντας αναφέρονται τα συμπεράσματα που προέκυψαν.

This diploma thesis focuses on the study, simulation and implementation of a three-phase inverter that is intended to control a three-phase permanent magnet synchronous motor (PMSM) that is used in automotive applications. The thesis was elaborated in the Laboratory of Electromechanical Energy Conversion of the Department of Electrical and Computer Engineering of the Polytechnic School of University of Patras. The objective of this diploma thesis is the implementation of a reliable, robust and compact construction of a controller, that can operate in an automotive environment. Due to the working environment of the controller, not only the power conversion and fast transient response requirements have to be met, but also safety and volume requirements. As far as volume requirements were concerned, these were met by implemented both power and control circuit in the same PCB, while safety requirements were met by electrical isolation between high and low voltage circuit. Initially in the thesis, a review of the history of electric vehicles development is given, followed by an analysis of an electric vehicle’s powertrain. Then, the fundamental concept of magnetic field was presented and the principle of operation of permanent magnet synchronous motor (PMSM) studied. Subsequently, the equations of PMSM and the inverter topology are presented and described in depth. Moreover, the most basic pulses modulation techniques of a three-phase inverter were explained and the Field Oriented Control (FOC) method of Direct Torque and Flux Control (DTFC) are described too. Because of the type of control, which include a closed loop, the basic concept of PID controller theory are also studied. Then are described the operation of devices which needed to estimate the angular position of the rotor. The next step was to design and simulate the system in Simulink/MATLAB software, in order to monitor the behavior of the system’s response under various of operation scenarios and to tune the PID controllers. Afterwards, the design of the board and the selection of the components were given. As a final step the layout design and the actual board are presented, and also the firmware of the microcontroller and the experiments that were carried out in an actual motor. Closing were described how the inverter handled the problems encountered due to machine defects.

Electric vehicles standards, charging infrastructure, and impact on grid…

Electric vehicles standards, charging infrastructure, and impact on grid integration: A technological review

H.S. Das, M.M. Rahman, S. Li, C.W. Tan

Renewable and Sustainable Energy Reviews

Transportation electrification is one of the main research areas for the past decade. Electric vehicles (EVs) are taking over the market share of conventional internal combustion engine vehicles. The increasing popularity of EVs results in higher number of charging stations, which have significant effects on the electricity grid. Different charging strat2egies, as well as grid integration methods, are being developed to minimize the adverse effects of EV charging and to strengthen the benefits of EV grid integration. In this paper, a comprehensive review of the current situation of the EV market, standards, charging infrastructure, and the impact of EV charging on the grid is presented. The paper introduces the current EV status, and provides a comprehensive review on important international EV charging and grid interconnection standards. Different infrastructure configurations in terms of control and communication architectures for EV charging are studied and evaluated. The electric power market is studied by considering the participation roles of EV aggregators and individual EV owners, and different optimization and game based algorithms for EV grid integration management are reviewed. The paper specially presents an evaluation on how the future EV development, such as connected vehicles, autonomous driving, and shared mobility, would affect EV grid integration as well as the development of the power grid moves toward future energy Internet and how EVs would affect and benefit the development of the future energy Internet. Finally, the challenges and suggestions for the future development of the EV charging and grid integration infrastructure are evaluated and summarized.

Impacts of Driving Conditions on EV Battery Pack Life…

Impacts of Driving Conditions on EV Battery Pack Life Cycle

Huijun Liu, Fenfang Chen, Yuxiang Tong, Zihang Wang, Xiaoli Yu and Rui Huang

World Electric Vehicle Journal

The aging of lithium-ion batteries (LIBs) is a crucial issue and must be investigated. The aging rate of LIBs depends not only on the material and electrochemical performance but also on the working conditions. In order to assess the impact of vehicle driving conditions, including the driving cycle, ambient temperature, charging mode, and trip distance on the battery life cycle, this paper first establishes an electric vehicle (EV) energy flow model to solve the operating parameters of the battery pack while working. Then, a powertrain test is carried out to verify the simulation model. Based on the simulated data under different conditions, the battery capacity fade process is estimated by using a semi-empirical aging model. The mileage (Ф) traveled by the vehicle before the end of life (EOL) of the battery pack is then calculated and taken as the evaluation index. The results indicate that the Ф is higher when the vehicle drives the Japanese chassis dynamometer test cycle JC08 than in the New European Driving Cycle (NEDC) and the Federal Test Procedure (FTP-75). The Ф will be dramatically reduced at both low and high ambient temperatures. Fast charging can increase the Ф at low ambient temperatures, whereas long trip driving can always increase Ф to varying degrees.

Online estimation ofinertial parameter for lightweight electric vehicle using…

Online estimation ofinertial parameter for lightweight electric vehicle using dual unscented Kalman filter approach

Xianjian Jin, Junpeng Yang,Yanjun Li,Bing Zhu,Jiadong Wang,Guodong Yin

IET Intelligent Transport Systems

Accurate knowledge of vehicle inertial parameters (e.g. vehicle mass and yaw moment of inertia) is essential to manage vehicle potential trajectories and improve vehicle active safety. For lightweight electric vehicles (LEVs), whose control performance of dynamics system can be substantially affected due to the drastic reduction of vehicle weights and body size, such knowledge is even more critical. This study proposes a dual unscented Kalman filter (DUKF) approach, where two UKFs run in parallel to simultaneously estimate vehicle states and parameters such as vehicle velocity, vehicle sideslip angle, and inertial parameters. The proposed method only utilises real‐time measurements from torque information of in‐wheel motor and sensors in a standard car. The four‐wheel non‐linear vehicle dynamics model considering payload variations is developed, local observability of the DUKF observer is analysed and derived via differential geometry theory. To address the non‐linearities in vehicle dynamics, the DUKF and dual extended Kalman filter (DEKF) are also presented and compared. Simulations with various manoeuvres are carried out using the platform of MATLAB/Simulink‐Carsim®. Simulation results of MATLAB/Simulink‐Carsim® show that the proposed DUKF method can effectively estimate inertial parameters of LEV under different payloads. Moreover, the investigation reveals that the proposed DUKF approach has better performance of estimating vehicle inertial parameters compared with the DEKF method.

Economic and technical management of an aggregation agent for…

Economic and technical management of an aggregation agent for electric vehicles: a literature survey

Ricardo J. Bessa and Manuel A. Matos

European Transactions on Electrical Power

The foreseeable increase in the use of electric vehicles (EV) led to the discussion on intermediate entities that could help manage a great number of EV. An aggregation agent for electric vehicles is a commercial middleman between a system operator (SO) and plug‐in EV. From the SO perspective, the aggregator is seen as a large source of generation or load, which could provide ancillary services such as spinning and regulating reserve. Generally, these services will be provided in the day‐ahead and intraday electricity markets. In addition, the aggregator also participates in the electricity market with supply and demand energy bids. This paper provides a comprehensive bibliographic survey on the aggregator role in the power system operation and electricity market. The scope of the survey covers 59 references divided in journal, conference proceedings, thesis, research papers, and technical reports published after 1994. These papers are put into several technical categories: electricity market and EV technical and economic issues; aggregation agent concept, role and business model; algorithms for EV management as a load/resource. Copyright © 2011 John Wiley & Sons, Ltd.

Βέλτιστος σχεδιασμός και χωροθέτηση δημόσιων σταθμών φόρτισης ηλεκτρικών οχημάτων

Βέλτιστος σχεδιασμός και χωροθέτηση δημόσιων σταθμών φόρτισης ηλεκτρικών οχημάτων

Περιβολάρης, Παναγιώτης

Optimum design and space allocation of vehicle charging stations for public use

Τμήμα Πολιτικών Μηχανικών (ΜΔΕ), Πανεπιστήμιο Πατρών

Με δεδομένο ότι τα ηλεκτρικά οχήματα και οι υποδομές που απαιτούνται για την ορθή λειτουργία τους διαδραματίζουν και θα διαδραματίσουν σημαντικό ρόλο στο μέλλον, ένα μέρος της έρευνας που γίνεται σήμερα αφορά το θέμα αυτό. Η παρούσα εργασία απασχολείται με τις υποδομές που είναι απαρατήρητες για την υποστήριξη χρήσης των ηλεκτρικών οχημάτων. Συγκεκριμένα διερευνά την επιλογή του σημείου εγκατάστασης σταθμών φόρτισης ηλεκτρικών οχημάτων καθώς και το πόσες θέσεις για φόρτιση θα διαθέτει ο κάθε ένας από αυτούς. Αξιοποιώντας, στο βαθμό που ήταν εφικτό, την μέχρι τώρα έρευνα έγινε προσπάθεια να δημιουργηθεί ένα πλαίσιο αξιολόγησης πιθανών χώρων εγκατάστασης έτσι ώστε τελικά να καταλήξει στη καλύτερη δυνατή ανάπτυξη του δημόσιου δικτύου φόρτισης προκειμένου να ικανοποιήσει τις ανάγκες των χρηστών. Αρχικά η περιοχή μελέτης χωρίζεται σε τμήματα, το μέγεθος των οποίων εξαρτάται από τον μελετητή. Έπειτα αξιολογούνται οι παράγοντες που λειτουργούν θετικά ή αρνητικά για την εγκατάσταση ενός σταθμού σε κάθε ένα από τα τμήματα και το πόσο σημαντικός είναι ο καθένας από αυτούς για το τμήμα. Για παράδειγμα το πλήθος των ηλεκτρικών οχημάτων, η ύπαρξη χώρου στάθμευσης και δημόσιας υπηρεσίας είναι μερικοί από τους παράγοντες αυτούς. Με τον τρόπο αυτό δημιουργείται ένας χάρτης βαρύτητας. Με βάση τον χάρτη αυτό και την εφαρμογή μίας συνάρτησης καταλληλότητας που τοποθετεί τους σταθμούς κεντροβαρικά, έτσι ώστε να είναι σε θέση να εξυπηρετούν όλους τους χρήστες καταλήγουμε σε ένα πολύπλοκο πρόβλημα το οποίο για να επιλυθεί (αν είναι εφικτό) με αναλυτικές μεθόδους, χρειάζεται πάρα πολύ χρόνο. Για τον λόγο αυτό χρησιμοποιούνται μεταευρετικές μέθοδοι βελτιστοποίησης και συγκεκριμένα οι μέθοδοι προσομοιωμένης ανόπτησης και αναζήτησης αρμονίας. Τέλος αφού βρεθεί η λύση, δηλαδή ο αριθμός των σταθμών γίνεται η διαστασιολόγησή τους, δηλαδή πόσες θέσεις φόρτισης θα πρέπει να διαθέτει ο κάθε ένας ώστε να είναι σε θέση να εξυπηρετήσει με ικανοποιητικό τρόπο τη ζήτηση που δημιουργούν οι χρήστες. Η διαστασιολόγηση γίνεται με χρήση θεωρίας τηλεπικοινωνιακής κίνησης και συγκεκριμένα του Μαρκοβιανού μοντέλου απωλειών M/M/s(0) . Το μοντέλο υπολογίζει πόσες θέσεις θα πρέπει να διαθέτει κάθε σταθμός έτσι ώστε να επιτυγχάνεται ένας συγκεκριμένος βαθμός εξυπηρέτησης (Grade Of Service – GOS). Η ανάλυση που γίνεται τελικά υπολογίζει το πλήθος των σταθμών φόρτισης, τις θέσεις φόρτισης ανά σταθμό αλλά και συνολικά και σε ποια τμήματα της περιοχής θα πρέπει να εγκατασταθούν οι σταθμοί για την καλύτερη εξυπηρέτηση. Όλα τα παραπάνω αξιολογούνται για περιοχή μελέτης την πόλη της Πάτρας. Γίνεται ανάλυση έξι σεναρίων στα οποία μεταβάλλεται το ποσοστό ύπαρξης ηλεκτρικών οχημάτων στο σύνολο του στόλου καθώς και ο GOS. Τέλος εξάγονται τα γραφήματα του συνόλου των σταθμών και των θέσεων φόρτισης σε συνάρτηση με το GOS έχοντας σαν παράμετρο το ποσοστό των Battery Electric Vehicles (BEV) στο σύνολο του στόλου και σε συνάρτηση του ποσοστού των BEV έχοντας σαν παράμετρο το GOS. Με την εργασία αυτή γίνεται ουσιαστικά προσπάθεια δημιουργίας μιας μεθοδολογίας σχεδιασμού και ανάπτυξης των δημόσιων υποδομών φόρτισης οι οποίοι θα αποτελούν στο μέλλον αναπόσπαστο κομμάτι του αστικού περιβάλλοντος.

Electric Vehicles and all the necessary infrastructure that is essential to support their proper function will play a very important role in years to come. In nowadays a part of the research is taking place in that field. The present thesis deals with that subject and specifically is exploring the optimal places to install public charging stations for electric vehicles and furthermore how many charging points will be installed in each station. Taking into consideration the recent research in that field so far, an attempt was made for the creation of a framework which leads to the best possible deployment of public charging stations network capable to fulfill users needs. Originally the study area is divided into sections, with size that is determined by the student. Afterwards an evaluation of all the factors which affect positive or negative the installation of a station in each section is taking place. For example, the number of electric vehicles, the existence of a parking or the existence of public service. With that way a weight map is created. Using that map together with a fitness function, which puts all stations in equal distances from the center of gravity in a way to service all users, we create a complex problem which is very difficult (if it is possible) to solve with analytic optimization methods and takes too much time. For that reason, metaheuristic optimization methods are used and in specific the methods of simulated annealing and harmony search. Finally, after finding the solution, the dimensioning of the stations is taking place. Namely the number of charging points for each station in order to be able to serve the requested demand. The dimensioning is created with the use of telecommunication traffic and in particular with the use of Marcov loss model M/M/s(0). The model computes how many charging points will be needed so that each station to serve users with standard grade of service (GOS). The analysis is calculating the number of charging stations, the number of charging points in each station and the sections which are best for the installation of stations. All the above are evaluated using as study area the city of Patras. Six scenarios are analyzed taking as variables the number of electric vehicles as percent of the total vehicle fleet, the percentage of stations public use and the grade of service. Using the results, graphs which represent the total number of stations and the total number of charging points in relation with grade of service using as parameter the percentage of electric vehicles and vise versa. With this thesis an attempt is made to create a methodology for the development and dimensioning a public electric vehicles charging stations network which will play vital part in years to come.

Μελέτη και κατασκευή τριφασικού αντιστροφέα για ηλεκτρικό αγωνιστικό μονοθέσιο…

Μελέτη και κατασκευή τριφασικού αντιστροφέα για ηλεκτρικό αγωνιστικό μονοθέσιο όχημα

Σύρπας, Παναγιώτης

Design and implementation of a three phase inverter for electric racing vehicle

Εργαστήριο Ηλεκτρομηχανικής Μετατροπής Ενέργειας του Τμήματος Ηλεκτρολόγων Μηχανικών και Τεχνολογίας Υπολογιστών της Πολυτεχνικής Σχολής του Πανεπιστημίου Πατρών

Η εργασία αυτή εκπονήθηκε στο Εργαστήριο Ηλεκτρομηχανικής Μετατροπής Ενέργειας του Τμήματος Ηλεκτρολόγων Μηχανικών και Τεχνολογίας Υπολογιστών της Πολυτεχνικής Σχολής του Πανεπιστημίου Πατρών σε συνεργασία με το Εργαστήριο Συστημάτων Παραγωγής και Αυτοματισμού (LMS) του τμήματος Μηχανολόγων και Αεροναυπηγών Μηχανικών . Σκοπός είναι η μελέτη και κατασκευή ενός τριφασικού αντιστροφέα, για τον έλεγχο τριφασικού κινητήρα μόνιμου μαγνήτη μέγιστης ισχύος 35kW, που χρησιμοποιείται σε ηλεκτρικό αγωνιστικό μονοθέσιο Formula Student. Το ηλεκτροκινητήριο σύστημα του μονοθέσιου προς μελέτη αποτελείται από τέσσερεις κινητήρες, καθένας από τους οποίους δίνει κίνηση σε κάθε τροχό ανεξάρτητα. Αρχικά γίνεται μία σύντομη περιγραφή του διαγωνισμού Formula Student και της φοιτητικής ομάδας του Πανεπιστημίου Πατρών, UoP Racing Team. Ακολουθεί μία ανάλυση των διαφορετικών τοπολογιών ηλεκτροκινητήριων συστημάτων ενώ διευκρινίζονται οι περιορισμοί βάσει των κανονισμών του διαγωνισμού. Στη συνέχεια γίνεται αναφορά των διαφορετικών τύπων σύγχρονων κινητήρων μόνιμου μαγνήτη, των εξισώσεων που διέπουν τη λειτουργία τους καθώς και το ισοδύναμο κύκλωμα τους. Αναφέρονται επίσης τα χαρακτηριστικά του κινητήρα προς μελέτη. Γίνεται ανάλυση του αντιστροφέα και των διαφορετικών μεθόδων παλμοδότησης του με έμφαση στη διαμόρφωση εύρους παλμών με χρήση διανύσματος στο χώρο (SVPWM). Το επόμενο βήμα περιλαμβάνει την ανάπτυξη του αλγορίθμου Μέγιστης ροπής ανά αμπέρ (MTPA) . Στο περιβάλλον Simulink γίνεται προσομοίωση του κλειστού βρόχου ελέγχου προσανατολισμένου στο πεδίο με αισθητήρα θέσης (FOC) χρησιμοποιώντας τις αναφορές ρευμάτων του αλγορίθμου MTPA υπό τη μορφή πινάκων. Ακολουθεί λεπτομερής αναφορά των κυκλωμάτων που σχεδιάστηκαν για τη λειτουργία του αντιστροφέα και υλοποιήθηκαν σε τρεις διαφορετικές πλακέτες. Γίνεται επίσης αναφορά του τρόπου υλοποίησης του κλειστού βρόχου ελέγχου σε μικροελεγκτή. Σημαντική επίσης είναι και η μελέτη για τον υπολογισμό των απωλειών των ημιαγωγικών στοιχείων που επηρέασαν τον σχεδιασμό και κατασκευή της ψυκτικής πλάκας. Τέλος παρουσιάζονται τα αποτελέσματα των πειραμάτων που διεξήχθησαν, τα συμπεράσματα που προέκυψαν και προτάσεις μελλοντικής βελτίωσης του αντιστροφέα.

This diploma thesis was developed in the Laboratory of Electromechanical Energy Conversion of the Department of Electrical and Computer Engineering with the collaboration of Laboratory for Manufacturing Systems & Automation (LMS) of the Department of Mechanical and Aeronautical Engineering at the University of Patras. The purpose of this diploma thesis is to study and build a three-phase inverter to control a three-phase permanent magnet motor of 35kW maximum power that is used in an electric Formula Student racing car. The electromechanical system of the racing vehicle to be studied, consists of four motors, each of which moves each wheel independently. In the beginning, the Formula Student competition is briefly descripted along with the UoP Racing Team of the University of Patras. Then follows an analysis of the different electromechanical systems topologies. Sequentially, different types of permanent magnet synchronous motors, the equations governing their operation and their equivalent circuit are explained. Also, the characteristics of the engine to be studied are referred. An analysis of the inverter and its different Pulse Width Modulation (PWM) schemes is made focusing on SVPWM which implemented in the designed inverter. The next step involves the development of the Maximum Torque per Amperity (MTPA) algorithm. In the Simulink environment, the Field Oriented Control (FOC) with position sensor in closed loop was simulated using the MTPA reference currents in the form of Look Up Tables. Different switching frequencies were simulated and evaluated, using PI current controllers with antiwindup and feed-forward control. The next chapter includes a detailed report of the circuits designed and implemented on three different PCBs, for the operation of the inverter. The PCBs are separated on power PCB, the IGBT driver and the microcontroller with its peripherals. Reference is also made on how to implement the closed control loop on a microcontroller. It is also important to refer the calculation of losses of semiconductor devices. After the calculation of power losses, a cooling plate was simulated and manufactured to keep the IGBT module inside its temperature operating limits. Finally, the results of the experiments carried out, the conclusions reached and proposals for future improvement of the inverter are presented.

Σχεδίαση ηλεκτρικού κινητήρα για χρήση σε όχημα εξοικονόμησης ενέργειας

Σχεδίαση ηλεκτρικού κινητήρα για χρήση σε όχημα εξοικονόμησης ενέργειας

Βαμβακάς, Γεώργιος; Vamvakas, Georgios; Αντωνακάκης, Ηλίας – Δημήτριος; Antonakakis, Ilias – Dimitrios

Εθνικό Μετσόβιο Πολυτεχνείο. Σχολή Μηχανολόγων Μηχανικών. Τομέας Ρευστών

Η παρούσα εργασία πραγματεύεται τη σχεδίαση του κινητήρα πρόωσης για το νέο όχημα κατηγορίας «Urban Concept» της φοιτητικής ομάδας «Προμηθέας» του Εθνικού Μετσόβιου Πολυτεχνείου, το οποίο πρόκειται να συμμετάσχει στο διαγωνισμό εξοικονόμησης ενέργειας «Shell Eco-Marathon». Αρχικά, παρουσιάζεται μια σύντομη επισκόπηση της τεχνολογίας των ηλεκτρικών οχημάτων καθώς και τα κύρια σημεία της σχεδίασης ηλεκτρικών μηχανών. Συγκεκριμένα, αναλύεται η πλειονότητα των υπαρχουσών τεχνολογιών ηλεκτρικών μηχανών, και βάσει των προτερημάτων και μειονεκτημάτων της καθεμίας, δικαιολογείται η απόφαση να σχεδιαστεί μία Σύγχρονη Μηχανή Επιφανειακών Μονίμων Μαγνητών. Στη συνέχεια, αναλύονται οι δυνάμεις που επενεργούν στο όχημα, προκειμένου να καθοριστούν οι προδιαγραφές του κινητήρα. Η διαδικασία περιλαμβάνει ένα αρχικό βήμα προκαταρκτικής σχεδίασης με στόχο τον προσδιορισμό των κύριων χαρακτηριστικών και διαστάσεων της μηχανής. Εξετάζονται οι εξής δύο εναλλακτικές τοπολογίες συστήματος μετάδοσης: η απ’ ευθείας σύνδεση του κινητήρα με τον άξονα του τροχού και η παρεμβολή ενός κιβωτίου ταχυτήτων με λόγο μετάδοσης 3:1 μεταξύ κινητήρα και τροχού. Με εκκίνηση την προκαταρκτική σχεδίαση και με χρήση αλγορίθμων παραμετρικής σχεδίασης και ανάλυσης γεωμετριών μηχανών, παράγονται δύο σύνολα γεωμετρικών διαμορφώσεων, ένα για κάθε τοπολογία συστήματος μετάδοσης. Τα προαναφερθέντα σύνολα σχηματίζονται μέσω μεταβολής διαφορετικών γεωμετρικών χαρακτηριστικών, όπως ο αριθμός των πόλων, η εξωτερική διάμετρος, το μήκος και ο αριθμός των ενεργών εν σειρά ελιγμάτων στις αύλακες του στάτη. Η ανάλυση ευαισθησίας παράγει περί τις 2.600 εναλλακτικές γεωμετρίες για κάθε διαμόρφωση του συστήματος μετάδοσης και ο στόχος της είναι να προσδιοριστούν οι εξωτερικές διαστάσεις και η βασική διαμόρφωση της μηχανής. Οι γεωμετρίες των μηχανών αξιολογούνται με βάση τη μάζα και την απόδοσή τους στην εκάστοτε ονομαστική κατάσταση λειτουργίας. Η σύγκριση των μηχανών βασίζεται στην κατανάλωση ενέργειας ανά χιλιόμετρο οδήγησης του οχήματος με την ονομαστική του ταχύτητα. Προκρίνεται μία γεωμετρία ανά διαμόρφωση κιβωτίου ταχυτήτων, με κριτήριο το μέγιστο βαθμό απόδοσης και την ελάχιστη μάζα, αλλά και με προϋπόθεση την επαρκή ικανοποίηση των προδιαγραφών επίδοσης του οχήματος. Ακολουθεί μία δεύτερη ανάλυση ευαισθησίας, κατά την οποία οι δύο επιλεγμένες γεωμετρίες μηχανών εξετάζονται περαιτέρω, με σκοπό να διαπιστωθεί εάν η μεταβολή των χαρακτηριστικών του εσωτερικού τους επιφέρει βελτίωση της απόδοσης ή ελάττωση της μάζας διατηρώντας ικανοποιητικά χαρακτηριστικά επίδοσης για την εφαρμογή. Αυτή η δεύτερη ανάλυση παράγει τον τελικό κινητήρα, ο οποίος επιλέγεται για χρήση στο όχημα. Τέλος, από την ανάλυση των προσομοιωμένων δεδομένων, μελετάται η επίδραση των εν σειρά ενεργών τυλιγμάτων στο χάρτη απόδοσης και στην ονομαστική ταχύτητα μιας Σύγχρονης Μηχανής Επιφανειακών Μονίμων Μαγνητών. Η ανάλυση πραγματοποιείται μέσω του λογισμικού MATLAB σε συνδυασμό με το λογισμικό πεπερασμένων στοιχείων FEMM.

This thesis is dedicated to the design of the traction electric motor that will be used in the new Urban Concept car of the “Prometheus” student team from the National Technical University of Athens, which is going to compete at the “Shell Eco-Marathon” competition. First, a short overview of electric vehicle technology and the fundamentals of electric machine design are presented. The majority of the existing motor technologies is analysed and based on the advantages and disadvantages, the choice of designing a Surface Mounted Synchronous Permanent Magnet Motor is explained. Second, the specifications of the motor are set following a dynamic analysis of the urban concept car. Afterwards, a preliminary design process is explained in order to extract the outer dimensions and characteristics of the motor in case a gearbox with no reduction ratio or a gearbox with a reduction ratio of 3:1 is used. Following the preliminary analysis, using a parametric design algorithm, two clouds of motors are formed, one for each gearbox configuration. The clouds are formed by scanning different geometrical parameters of the motors, such as the number of poles, the stator outer diameter, the length and the effective turns. The sensitivity analysis produces approximately 2.600 motors for each configuration. The motors are evaluated based on their mass and efficiency on their respective nominal operating condition, as well as based on the comparison of their energy consumption over a given route. One motor per gearbox configuration is selected according to the criteria mentioned and its metrics are presented. The two selected motors are further examined in order to investigate whether by altering their microgeometrical characteristics, their efficiency is enhanced or their mass decreased, without compromising their power. This second analysis produces the finalized motor, which is selected to be fitted in the urban concept car. Lastly, from the analysis of the simulated data the impact of the effective turns on each Surface Mounted Synchronous Permanent Magnet Motor’s efficiency map and base speed is summarized. The entire analysis is carried out using MATLAB coupled with the finite elements software FEMM.

Posts pagination

1 2 3 4 5 … 7
EV BOXCASE - IONI ENGINEERING

2021 FORMULA-E

https://www.youtube.com/watch?v=BtpLZYmUQ84

ΘΕΜΑΤΑ ΑΝΑ ΚΑΤΗΓΟΡΙΑ

ΝΕΑ ΣΥΣΤΗΜΑΤΑ & ΜΟΝΤΕΛΑ EV

  • Κατασκευή οθόνης πολλαπλών ενδείξεων για ηλεκτρικό όχημα
  • Audi A6 E-Tron Concept
  • Τι Ισχύει Πραγματικά για τα Ηλεκτροκίνητα Οχήματα
  • What does an electric vehicle replace?
  • Mapping the technology diffusion of battery electric vehicle based on patent analysis: A perspective of global innovation systems

Η ΔΙΚΗ ΜΟΥ ΛΥΣΗ EV BOXCASE

Ολοκληρωμένο Σύστημα Μελέτης, Σχεδιασμού και Εγκατάστασης Σταθμών Φόρτισης για Οικιακές, Επαγγελματικές και Κοινόχρηστες Εφαρμογές στο Δημόσιο Χώρο
Η υποβολή της φόρμας επικοινωνία συνεπάγεται ανεπιφύλακτη αποδοχή επεξεργασίας προσωπικών δεδομένων αποκλειστικά για ενημερωτικούς σκοπούς τώρα ή στο μέλλον. Ως αποτέλεσμα της επεξεργασίας ενδέχεται να λαμβάνεται ηλεκτρονικές μορφές επικοινωνίας από τις οποίες μπορείτε ανά πάσα στιγμή να παραιτηθείτε.

ΕΙΔΑΤΕ ΠΡΟΣΦΑΤΑ

  • Academia in Action
  • COMMUNICATION FORM
  • EVBOX HMP
  • NEWS ON EV SYSTEMS
  • Privacy Policy
  • SAY YES TO EV
  • Store

ΟΛΟΚΛΗΡΩΜΕΝΟ ΣΥΣΤΗΜΑ ΜΕΛΕΤΗΣ ΣΤΑΘΜΩΝ ΦΟΡΤΙΣΗΣ EV

ΝΕΑ ΣΥΣΤΗΜΑΤΑ & EV

  • Κατασκευή οθόνης πολλαπλών ενδείξεων για ηλεκτρικό όχημα 09/05/2021
  • Audi A6 E-Tron Concept 19/04/2021
  • Τι Ισχύει Πραγματικά για τα Ηλεκτροκίνητα Οχήματα 18/04/2021
  • What does an electric vehicle replace? 17/04/2021
  • Mapping the technology diffusion of battery electric vehicle based on patent analysis: A perspective of global innovation systems 13/04/2021

ΘΕΜΑΤΟΛΟΓΙΑ

MENU ΠΛΟΗΓΗΣΗΣ

  • ΝΕΑ ΣΥΣΤΗΜΑΤΑ & EV
  • ΑΚΑΔΗΜΑΪΚΗ ΚΑΙΝΟΤΟΜΙΑ
  • ΕΠΙΚΟΙΝΩΝΙΑ
  • E-SHOP & ΠΑΡΑΓΓΕΛΙΕΣ
    • ΦΟΡΤΙΣΤΕΣ AC & ΚΑΛΩΔΙΩΣΗ
    • ΦΟΡΤΙΣΤΕΣ DC

IONI ENGINEERING

ΦΟΡΤΙΖΕΙ ΤΗΝ ΗΛΕΚΤΡΟΚΙΝΗΣΗ

COPYRIGHT 2003-2021 | IONI ENGINEERING LLC | All rights reserved
Theme by Colorlib Powered by WordPress